Ceramic Polymer

The ISDW GmbH, a business partner of ceramic polymer GmbH, the badly damaged sewage plant in a Northern German group renovated professional rehabilitation of a sewage plant In the summer of this year. With skilled Know-How and the ceramic polymer coating systems CP-Synthofloor beta 8016 as filler and primer, as well as the high end product ProGuard CN 200 ISDW GmbH turned the ailing system back into an operational state. Due to the constant contact with highly corrosive waste water and polluted atmosphere, the concrete was extensively up to 10 cm deep washed or worn. The steel reinforcement was partly completely free and was extremely corroded. The affected concrete was away, tears clinging, the complete surface sandblasted, accurately balanced erosion and leaching. Add to your understanding with Road tankers. First, the inner basin was modified. To smooth smooth of wall surfaces, priming CP Synthofloor was beta 8016 “used as a scratch filler. After drying, the team of ISDW GmbH milled the Interface to optimally prepare the ground for the job of a first coat.

A corresponding throat has been drafted to protect of the edges. The bottom was offset with the scraper spatula and milled. Now the first coat of concrete, also followed with the CP-Synthofloor product beta 8016 “. The coating of ProGuard CN 200 “was applied in two layers: the 1st in light grey (see picture above), the 2nd to the ideal control in dark grey. In the same sequence, the ISDW GmbH now carried out the work on the outer basin. The coating systems CP-Synthofloor beta 8016 “: this system is medium viscosity, can be applied with a simple Applikationsgeraten, has an excellent resistance to chemicals and provides a high protection against wear and tear due to the special fillers. With the addition of quartz sand or other place means it can be used as a scraper spatula. ProGuard CN 200 “is one of the premium coatings of ceramic polymer GmbH. This solvent-free product has a very high chemical resistance, even at operating temperatures up to 150 C. It is the ideal choice for wastewater facilities.

Categories: General Tags: Tags: ,