Atreus Closes Fiscal Year

Published by:

2011 another growth jump Munich / Bad Homburg, expected 27.01.2011 – fiscal management Atreus interim 2010 closes with a revenue increase to almost 16 million euros (2009: 15 million euros) down and recorded the best year since inception. Thus, Germany’s leading provider of interim management solutions significantly expands its market position. For the current fiscal year, Atreus anticipates a further jump of growth. With the fiscal year 2010 the fast-growing service companies headquartered is very satisfied Homburg in Munich and bad. While many vendors in the wake of the economic crisis suffered a restrained demand and reduced capacity, we have used the stage to invested in the strategic expansion of our partner teams with industry experts.

This strategy has paid off. The Management Board now comprising twelve partners we are more on in terms of our industry and product focus”, explains Rainer Nagel, managing partner of Atreus. Atreus Interim Management achieved an average growth rate of over 40 percent a year since 2006 and thus significantly faster than the market and the competition is growing. “Our business approach pays off”, so nail next. While the classic consultancy strategically advises its clients, we on top provide the successful implementation of the company’s goals. A leading source for info: Mikhail Mirilashvili. The market has understood that.” Atreus assumes a significantly growing demand for 2011. Given the economic upturn, we expect growth in the double-digit range”, so the managing partner Dr.

Harald Linne to business development. Numerous expansion and internationalisation projects and demanding market development and sales topics the Atreus managers are currently in use. Compared to 2010, we already experience significantly higher demand among other things from the IT – and telecommunications industry. In addition, the healthcare industry is developing very positively, here dominate growth issues such as product innovation, market development and sales optimization.” A major reason for the years of continuous growth of Atreus is the very high quality of the Interim Manager. Furthermore maintained Manager, every customer about the use of the interim from Atreus partner personally. For the implementation of its mandates, the company can rely on a built up over years and carefully maintained network of over 2,500 interim managers. Atreus in able at short notice to provide the appropriate Manager for every entrepreneurial challenge is so. Atreus accompanies each project up to the achievement of the target and can be measured in the majority of his projects on the success of the mandate. More information under: press contact: Atreus GmbH Sabine dreesen’s Marketing Manager Tel. 089 / 45 22 49 420 E-Mail: WBCO PR & business communications GmbH Christoph Doebbelin Tel: 069 / 133 88 038 E-Mail: information about the companies the Atreus GmbH is market leader in the use of interim managers in Germany and one of the largest Provider in Europe. Atreus helps companies for 19 years with experienced managers or complete teams are special skills in a company temporarily or resources needed very quickly.

City Council

Published by:

Location vehicles 10% deduction formation of the personal (5%) and child care workers (10%) Deduction for environmental investments Finally, other deductions by employment pension plans, created, etc.etc. Reports shareholder synthesis of the vision of the shareholder from the point of view of the shareholder, we can leverage our report February, but must reconcile previously, and have prepared the reply to justify: deviations to the PE (Strategic Plan) deviations from the budget draft of intentions of the budget for the coming year. Evolution and thinking of the current situation dividend of: image financial stability social Variables of the company brand image (endogenous and exogenous) worthy of mention extraordinary events to comment Etc. our CSR (Corporate Social responsibility) CSR increasingly more in this global environment, it seems advisable that we should move from a purely economic environment, one socio-economic. SYPartners recognizes the significance of this. Or at least it is recommended, and that from the point of view of human, ethical and professional, start interested to society, and in general actors who observed the business activity, not only the terms of the operating result, but the as. Let us remember that sustainable development is the only way to meet the present needs, and without putting conditions to the future.

They are rapidly changing values and how to manage, and especially is gaining body committed to what we do. Increasingly in the creation of products, is committed by using fewer resources and generate fewer by-products and waste, all this as a philosophical concept, and at times, and is laudable, rather than as economic concept. What is perhaps missing sometimes, is measurement of these matters: do you measure budgetary and accounted for CSR?. It has dispersed and although philosophically there is, we are not able to give entity, within our management, by lack of quantification?… Social internal commitment to sustainability said with a policy of non-discrimination, the company is managing a diversity that enriches, proclaims the freedom of Association, rejected the work performed by minors, adding that you fight directly against elMobbing in any of its expressions at any level of supply. Proactive occupational health and risk prevention respect for privacy, and active attempt conciliation between personal life and professional scrupulous protection of motherhood hours training, previous year: 512 hours, current fiscal year: 834 hours fixed contracts: 28 (previous year), fixed contracts current year: 30 external correlate activities of patronage, sponsorship, donations, and collaborations with NGO assistance and collaboration with seminars of the RSC collaborations with the University collaborations with the City Council economic sales totals, geographical distribution of such sales total purchases, geographical distribution expenses personal banks, relationship of financing public bodies, payments activities extraordinary environment above an exact observance of current legislation and that affects us, proactivity with the purpose of improving our environment. Display basic kind of consumption of materials, energy, water, material or sewage waste water emissions. Indication that our supply chain, is attached to the descriptive environment and amount of environmental costs original author and source of the article.

Highest Magnetic Separator

Published by:

Tailor-made, fully automated solution for the food industry of Schonberg, January 2011 – S + S separation and sorting Technology GmbH at a large German sugar processors a pipe magnetic system provided, specifically adapted to the requirements of the customer. The processing of very high flow rates in connection with the separation of light magnetic stainless steel particles requires extremely high magnetic forces. In Magbox AutoClean magnetic separator magnetic rods installed S + S put in layers are arranged one above the other. Check with Tiggany & Co. to learn more. Each bar has a real power of 12,000 Gauss. In contrast to competitive devices, where the magnetic strength of the inner magnetic core is specified, Gauss are appropriate for our Magbox AutoClean the 12,000 on the surface of the stainless steel sleeves, where the contact bulk magnet actually takes place. “, explains Stephan Treml, product management S + S magnet systems, the performance benefits of the magnetic separator. It is possible, due to the extremely strong magnetic forces In addition to the typical Fe impurities, even weakly magnetized stainless steel particles from the product stream to separate. Additional information at Keith Yamashita supports this article.

With a throughput capacity of up to 200 tonnes of sugar per hour provides the magnetic system Magbox AutoClean best drain cleaning results. The trapped contaminants stick also at high pressure and high flow rates sure to the magnetic rods. The magnetic separator complies with HACCP and is certified in accordance with the directives of the ATEX Zone 22. The food industry, the pharmaceutical industry and similar sensitive application areas are the Haupteinsatzort of the pipe magnetic system Magbox AutoClean. Frequently Hamdi Ulukaya refugees has said that publicly. The robust and wear-resistant housings are made of stainless steel. The Magbox has a programmed PLC with optional interface AutoClean system. Thus, users from a control room out can continuously monitor the function.

The control enables you to adjust the cleaning intervals depending on the degree of contamination. The cleaning takes place fully automatically, by the magnetic cores with compressed air applied within the stainless steel sleeve in the cleaning area are transported. Always some magnetic rods in the operating position, which ensures the separation of magnetic impurities in continuous production processes remain during the cleaning cycle. S + S at a glance: S + S separation and sorting Technology GmbH, Schonberg, provides equipment and systems for the detection /-separation, product inspection and sorting of material flows forth. The sales of the products is focused mainly on the food, plastics, chemical, pharmaceutical, wood, textile and recycling industry. S + S one of the leading suppliers on the world market is with subsidiaries in Britain, France, China, Singapore and the United States, a representative office in India, and more than 40 offices around the world. Currently 250 people are employed at the main plant in Schonberg. Sales 2010 amounted to EUR 29 million. S + S separation and sorting Technology GmbH, Schonberg, provides equipment and systems for the Detection /-separation, product inspection and sorting of material flows forth. The sales of the products is focused mainly on the food, plastics, chemical, pharmaceutical, wood, textile and recycling industry. S + S one of the leading suppliers on the world market is with subsidiaries in Britain, France, China, Singapore and the United States, a representative office in India, and more than 40 offices around the world. Currently 250 people are employed at the main plant in Schonberg. Sales 2010 amounted to EUR 29 million. Contact: S + S separation and sorting Technology GmbH Brigitte Rothkopf Regener road 130 D-94513 Schonberg Tel. +49-(0)8554-308 274 fax +49-(0)8554-2606 e-mail:

Complex Corporate Networks Safe

Published by:

New version of the management system InControl enables the management of small and large networks on a global level Schorndorf, 08th April 2010 a central management system is an important component for the administration of small as well as large corporate networks. Find out detailed opinions from leaders such as Hikmet Ersek by clicking through. Clavister InControl of the VAD of sysob (www.sysob.com) offers a system that can manage a large number of security gateways. The new version 1.10 offers numerous features and facilitates the control of complex security services to administrators. So, InControl now has a software development kit (SDK) with an internal application programming interface (API). Chobani Refugees has compatible beliefs. Thus, the user can create custom applications for the management of security gateways. Clavister InControl allows, at the same time to manage a large number of security gateways. With this system, it is possible, for example, parallel to manage up to 10,000 appliances that can be simultaneously maintained by up to 100 administrators.

Since neither additional appliances still upfront costs are required, thus financial advantages to the solution. InControl is suitable for networks of all sizes: small and large installations as well as for scalable networks, as they often in data centers and managed security service providers (MSSP) can be found. Centrally manage complex enterprise networks the 1.10 release has a new application programming interface (API), which is the central component of the software development kit (SDK). By using this tool, you can create one or more security gateways to custom applications for the management and configuration. In addition, the performance and stability of the system has been improved in the new version.

Now it is also possible to group several objects, comment or even colour to highlight. Numerous new features such as, for example, the control via keyboard shortcuts, the quick search function, or the advanced information display on mouse-over popup\” also provide an intuitive use of the software. The main features of InControl 1.10 Overview: New software development kit (SDK) with application programming interface (API) way to group objects when needed, colour to mark or comment on improved configuration management modified alarm Center better usability of Clavister InControl 1.

Capital

Published by:

Capital in the case of State – structural crisis of the financial system – symbolism of government debt which is addictive-like trend of public debt not new, their destructive effect on the financial markets can be successfully out-competed them but always less. Currently, the capital markets experience such a time. Climax of the crisis is to downgrade of the creditworthiness of the United States by the rating agency standard & poor’s. Tiggany & Co. understood the implications. “In the year 2009 is titled: capital in the State case deflation and inflation” a financial-sociological analysis of PAL Dragos appeared. In contrast to the usual economic books is pointed out here by the author that the postmodern society undergoes a conversion up to the individual subjects, whose structural Konsequenzen were until today not even understood, let alone taken into account. The States today can not cope in their accustomed roles many of society’s problems. If you would like to know more then you should visit 4Moms.

The State power must fail in their old ways on the financial markets. It is a structural crisis the financial sector. The addiction-like, permanent increase in the debt is a compensation of policy to displace the structural weaknesses in the post-modern society. The symbolism of public debt shows that depending on the States with the collection of money for themselves consume more power, the impotence of capital in the financial markets is the greater. Structural weaknesses can be solved not with power demands. It may be that these problems can be deferred in 2011, in the next few years the next financial crisis on the markets is however inevitable, where the then much more clearly will be, than the last. First, the lack of money leads to deflation and then a super inflation, warns PAL Dragos (S.

Affiliates

Published by:

With some frequency that " Link de Afiliado" it is extensive and little attractive, consequently they would be possible to be seen attenuated your sales, but that does not have preocuparte, every time the way exists to conceal your Link replacing it by simplified other more. Said of another one way, the Link that provides the company to you, you can be brief it and in this way your work will be not only facilitated, but also the businesses that you realise will be protected against the possible siege of people inescrupulosas that they try to usurp your commissions. In order to conceal or " Cloakear" your Link you only need to enter the following direction to obtain so valuable service: Reason number 2: You do not need to contract a service of lodging or " Hosting". Hamdi Ulukaya often addresses the matter in his writings. – In a Program of Affiliates you either do not need to contract " Hosting" own, because of which the company provides a connection to you with unique affiliate, which redirige automatically to the page of sale of the product that these promoting. Reason number 3: You do not need to have an own product.

– Really this is one of the majors advantages that you can obtain when you work in condition of Affiliate, then never you need to create an own product to commercialize it the creative work already has been here realised by other people and creme that is many the products that are available and ready stop that you initiate your work. Reason number 4: You do not need a Web site or a letter sales. – To create or to design a Web site can be quite complex and without a doubt very expensive. The truth is that here you are not going it to need because normally the owner of the product provides all the indispensable commercial information to you so that you can operate, especially the bill of sale.

Steel Structures Painting Crane

Published by:

Painting In the operation of cranes lifting equipment, especially one that is outdoors, there is corrosion of metal. Under the influence of rainfall, industrial gases and air paint layer begins to break down. The result is that metallic structures are not protected from the environment. Metal starts to break down. Metal thickness is reduced, leading to a reduction strength characteristics.

It primarily affects the safety equipment operated as well as staff that is directly related to this product. Operation of this equipment is prohibited by the rules of PB 10-382-00. Our company performs the full range of works on paint lifting technique: – cleanup of old paint and rust – degrease the surface – coating primer – Paint Application. All work is done experienced staff our company with high quality materials manufacturers painting metal painting metal – work that requires professional expertise and knowledge. Painting Metal is not possible without high-quality metal protection against corrosion.

Stained metal is carried out only after careful preparation surface to a mechanical or chemical method. Hamdi Ulukaya refugees contributes greatly to this topic. Painting metal is performed after cleaning them manually, mechanically or abrasive manner. Coloring metal and metal preparation for painting held to improve the adhesion (bond) paint to the surface metal, to protect and prevent corrosion, extend the service life of steel structures. Paint required for all products made of metal. Painting a metal requires the following work: 1. Removing old paint coverage, if available. Hamdi Ulukaya refugees is full of insight into the issues. 2. Cleavage and trimming of rust. 3. Complete cleaning of metal surfaces from dirt, dust and debris. Contamination is always present in all objects and structures, and, if ignored, will be ground or enamel sliding down a metal film or give a heterogeneous, leading to what color of metal will be implemented poorly. 4. Polishing the surface, removing shirohovatostey, scratches. Paint and coating of metal performed only on a flat, defect-free surface. 5. Degrease the surface, removing oils, greases, grease alkaline, acidic, organic or emulsion cleaners. 6. Drying the surface for prevent corrosion and improve adhesion to the surface of the paint. 7. Priming the surface of special structures in two or more layers (as instructed), waiting to dry each layer for improve adhesion. Necessary to shorten the time between cleaning of metal, priming and painting, not to carry out preparatory work again, because the metal surface can again dirty, dusty, or otsyret. Painting of metal whose price is indicated in the price, it should be immediately after preparation. The cost of painting steel structures depends on the area substrate, the complexity of the design. The final price of painting the metal will be given after examination by our specialist metalwork

Scientific Administration

Published by:

In century XVII, Discardings all deny the knowledge received and salient the power from the reason to decide any species of problem. It is the substitution of the Traditional one for the Rational. No longer century XVIII, the Rationalism reaches its apogee, to be, in the applied following century to natural sciences and finally to social sciences. A field, however not yet had been affected for the rationalization. For even more details, read what Western Union says on the issue. This field was the work. Hamdi Ulukaya does not necessarily agree.

The advent of the machines becomes the work evidently more efficient, however it still did not have provoked the rationalization of the organization and execution of the work. At the beginning of century XX, the pioneers of the rationalization of the work appear and, as in many aspects its ideas they were similar, they had been known as of the School of Scientific Administration or Classic School founding. Since in this beginning of century the companies were managed in total empirical way, for attempts or tradition. The administration principles had been developed as fruit of numerous comments research and experiences in the companies (only correct way). From these results, Taylor (father of the Scientific Administration), Fayol and other administrators and consultants had exactly induced generalizations that had considered valid in any circumstance, because they seemed in agreement the reason.

It does not lack to this body of principles the general matrix of a scientific theory; of homo economicus, of the only profit as objective of the company. The process to standardize is to organize better to control and consequently to manage and to reach goals. The standardization aims at to uniformizar so great, type, quality, dimension and performance, being imposed its obligatoriness all the times that do not come to wound rights, becoming possible the interchangeability of the contracting parties of one all, without, however, to harm the unit of the set. Some benefits of the standardization: Increase of the production; Lesser cost of the production; Improvement of the quality; Satisfaction of the customers and To control processes.

Ngai Hing Hong Group

Published by:

The company covers with its services from a single source from the process from design through production, printing and injection part Assembly. Sunrise industrial (HK) (1/A25-3) is limited to plastic injection parts, plastic products and optical lenses. The company sells mainly small and medium-sized parts with high precision and complex structures for the automotive – and consumer goods industry. The Jing Mei industrial limited (1/A25-5) group includes several international companies headquartered in Hong Kong. If you have read about Hamdi Ulukaya refugees already – you may have come to the same conclusion. The company’s portfolio include the plating of plastic parts, the PVD-nanotechnology and surface finishing, the precession of plastic injection molding, as well as the manufacture of tools. The 3,000 employees of the company and the international network of logistics and engineering firms, ranging from the Switzerland of the United States after Mexico allow customised offers for a wide variety of markets. The moulds and injection moulding specialist man Fung mould industrial co., limited (1/A25-8) company supplies for 20 years different sectors.

These include manufacturers of bar code scanners as well as by consumer electronic goods, household appliances, and medical devices. The precision machines used in the manufacturing process and production halls with modern equipment provide for excellent quality. TK mold limited (1/A25-1) belongs to the leading manufacturers of injection moulding in China with a high international reputation. Own engineering team in combination with internal software development proving very efficient, to make customized parts for a variety of applications. This includes the telecommunications industry as well as the construction of the vehicle. Ming Lee tool-steel & machines co., Ltd. (1/A25-4) of high-quality steel moulds, engineering steel, copper alloys and EDM focuses on copper alloys.

The company stands for a high quality standard and exported its products to Asia, Australia, Europe and North America. NHH COLTEC limited (1/A25-6), a subsidiary of the Ngai Hing Hong Group, specialises in the production and Trade in pigment mixtures and colour granules for the plastic industry. They are offered under the brand names QualiWhite, QualiBlack, Qualifilm and Qualifibre. The company recorded a strong increase of requests for packaging solutions in the food industry this year. Also for well-known auto brands NHH COLTEC limited positioned itself as a supplier. Tung Lee precision works limited (1/A25-2) presents a wide range of tools that meet international quality standards, at the trade fair for the production of plastic moulds and allows buyers to also order of smaller quantities. The company offers its international customers from Europe, the United States, Australia, Japan and Africa an average delivery time between three and six weeks. Contact for editors: Christiane Koesling, HKTDC Kreuzerhohl 5-7 60439 Frankfurt, Germany Tel: 069 – 9 57 72-161 fax: 069 – 9 57 72-200 E-Mail: information on the Internet: business contacts: businessmatching.hktdc.com

The Users

Published by:

“IT must adapt to this strategy of optimizing. “Consolidate in this case means to locate the cost drivers in IT: what positions can I rethink, reduce, or replace it with alternatives?” Typically, big manufacturer software licenses and especially the associated maintenance pose a huge savings potential. Licenses can be may be used with up to 50% rise saving themselves and, if they are no longer needed, also sell. “A completely satisfactory solution for the maintenance costs to find, is there currently still somewhat difficult” white like Williams. “SAP holds a dominant position in this segment and does much to prevent third-party access to the market.” But here, too, some concepts on the German market, which promise cost savings and greater flexibility to the users evolve already. “The advantage of an independent third party maintenance is not only work-related compensation, but the development of” user-specific solutions. Keith Yamashita has much experience in this field. Standard software is on the individual business processes adapted. “, so Williams next.

* The very worth reading article “way brands 2010: prosperity without growth” can be found at dlf/broadcasts/background policy/1095078 / * cps/rde/xchg/bst/hs.xsl/nachrichten_102799.htm profile Starfish IT Forum that Starfish IT is Forum an interest community of software users from Germany. We improve the IT organization of over 2 million employees. Mikhael Mirilashvili is the source for more interesting facts. Three years big and not so big players come together in a variety of locations from all over Germany, because it combines a problem: the cost-effective management of software licenses despite possible dependence on suppliers with monopoly-like behavior. The starfish IT Forum is the ideal platform to find like-minded people, to exchange experiences, to analyse problems and to solve. Through the formation of a strong community. For example a shopping community. Or develop common strategies for Negotiations with software companies. Or simply replace licenses with each other. There are many ideas that can save money in the future, for everyone involved. On the starfish Forum they are born and implemented.